25x62x17 Bearing
This bearing coms in both a sealed and a shielded version. Please select between the two below. Select 2RS for a sealed bearing or ZZ for a shielded bearing.
This bearing can be found with the following part numbers on it: 6305-2RS, 6305 2RS, 6305 RS, 6305RS, 6305-ZZ, 6305 ZZ, 6305ZZ, 6305 Z.
The 6305-2RS and 6305-ZZ is a 25mm ball bearing that is found in many applications. The 6305-2RS ball bearing has two contact rubber seals one on each side of the ball bearing. The 6305-ZZ ball bearing has two non-contact metal shields one on each side of the ball bearing. If your application requires a 6305 ball bearing with only one seal or shield you can get this ball bearing and take one of the shields or seals off. This 25mm ball bearing is high quality and can take electric motor demands if needed.
- 25 mm x 62 mm x 17 mm SKF 305-Z deep groove ball bearings
- 1.2500 in
- 3.1250 in
- 25 mm x 62 mm x 17 mm NSK 7305 B angular contact ball bearings
- 4050 RPM
- 23400 lb
- 25 mm x 62 mm x 17 mm NTN TMB305JR2C3 deep groove ball bearings
- a complete line of s
- 0.5000 in
- 25 mm x 62 mm x 17 mm NKE NJ305-E-MPA cylindrical roller bearings
- Lubrication Fitting
- UL, AFBMA, AGMA, ASM
- 25 mm x 62 mm x 17 mm ISB 6035-RZ deep groove ball bearings
- 25 mm x 62 mm x 17 mm
- 25 mm x 62 mm x 17 mm NKE 6305 deep groove ball bearings
- No Finish
- ±0.001 in
- 25,000 mm x 62,000 mm x 17,000 mm NTN NF305E cylindrical roller bearings
- Flanged Bearing
- CLF
- 25 mm x 62 mm x 17 mm NSK 6305NR deep groove ball bearings
- 6.92 KGS
- 24122-e1-c3-fag
- 25 mm x 62 mm x 17 mm NKE 1305-K self aligning ball bearings
- DD-13
- 1750 rpm
- 25,000 mm x 62,000 mm x 17,000 mm NTN-SNR 7305 angular contact ball bearings
- 1.219 in
- Cast Iron
- 25 mm x 62 mm x 17 mm ZEN P6305-SB deep groove ball bearings
- Needle Rollers
- Inch CAMROL (CY