85x130x22 Bearing
This bearing coms in both a sealed and a shielded version. Please select between the two below. Select 2RS for a sealed bearing or ZZ for a shielded bearing.
This bearing can be found with the following part numbers on it: 6017-2RS, 6017 2RS, 6017 RS, 6017RS, 6017-ZZ, 6017 ZZ, 6017ZZ, 6017 .
The 6017-2RS and 6017-ZZ is a 85mm ball bearing that is found in many applications. The 6017-2RS ball bearing has two contact rubber seals one on each side of the ball bearing. The 6017-ZZ ball bearing has two non-contact metal shields one on each side of the ball bearing. If your application requires a 6017 ball bearing with only one seal or shield you can get this ball bearing and take one of the shields or seals off. This 85mm ball bearing is high quality and can take electric motor demands if needed.
- 85 mm x 130 mm x 22 mm NTN 7017UCG/GNP4 angular contact ball bearings
- 8.94 Hz
- 3,000 rpm
- 85 mm x 130 mm x 22 mm SNFA VEX 85 /NS 7CE3 angular contact ball bearings
- Stud End
- 1.5000 in
- 85 mm x 130 mm x 22 mm NTN 5S-7017UCG/GNP42 angular contact ball bearings
- Cast Iron
- Standard
- 85,000 mm x 130,000 mm x 22,000 mm NTN-SNR 6017Z deep groove ball bearings
- ASTM-A-681, SAE J-43
- +0.005/-0.
- 85 mm x 130 mm x 22 mm NTN NU1017 cylindrical roller bearings
- 4.6250 in
- TriGard Seal
- 85 mm x 130 mm x 22 mm KOYO HAR017C angular contact ball bearings
- Two-Bolt Base
- Round
- 85 mm x 130 mm x 22 mm NSK 85BER10H angular contact ball bearings
- Cast Iron
- Round flange shape
- 85 mm x 130 mm x 22 mm NKE 6017-RSR deep groove ball bearings
- Round
- 7316577344564