110x170x28 Bearing
This bearing coms in both a sealed and a shielded version. Please select between the two below. Select 2RS for a sealed bearing or ZZ for a shielded bearing.This bearing can be found with the following part numbers on it:6022-2RS, 6022 2RS, 6022 RS, 6022RS, 6022-ZZ, 6022 ZZ, 6022ZZ, 6022 Z
The 6022-2RS and 6022-ZZ is a 110mm ball bearing that is found in many applications. The 6022-2RS ball bearing has two contact rubber seals one on each side of the ball bearing. The 6022-ZZ ball bearing has two non-contact metal shields one on each side of the ball bearing. If your application requires a 6022 ball bearing with only one seal or shield you can get this ball bearing and take one of the shields or seals off. This 110mm ball bearing is high quality and can take electric motor demands if needed.
- 110 mm x 170 mm x 28 mm NACHI NJ 1022 cylindrical roller bearings
- 0.7283 in
- 1.42 in
- 110 mm x 170 mm x 28 mm NSK 110BER10S angular contact ball bearings
- 23000 r/min
- 10 mm
- 110 mm x 170 mm x 28 mm NSK 6022ZZ deep groove ball bearings
- 41 000 r/min
- 14,4 mm
- 110 mm x 170 mm x 28 mm NKE 6022-2Z-N deep groove ball bearings
- 1.800
- metal with bronze an
- 110 mm x 170 mm x 28 mm NTN 6022ZZ deep groove ball bearings
- 110 mm x 170 mm x 28 mm
- 2.28
- Loyal Q1022 angular contact ball bearings
- 1058 kN
- 1683 r/min
- 110 mm x 170 mm x 28 mm NACHI 7022CDF angular contact ball bearings
- AST
- tapered bore